XBridge BEH C18 Method Validation Kit, 130Å, 5 µm, 4.6 mm X 250 mm, 3/pk

Utilize the XBridge BEH C18 Method Validation Kit, which was designed specifically for increasing lab throughput. The lab equipment provided here has three columns with various C18 sorbents (RP-18, ODS, Octadecyl). Whether you are creating a cutting-edge LC/MS test or a quality control technique, the XBridge BEH C18 Method Validation Kit will be adequate to meet your demands. Because fewer pieces of equipment need to be replaced due to the lab equipment's improved pH stability, column lifetimes are extended, and lab expenditures are reduced. The analytical column can also benefit from assay robustness and enhance column reliability. Additionally, by improving particle efficiency, the XBridge BEH C18 Method Validation Kit offers remarkable peak form and peak capacity.

Three Xbridge BEH C18 columns filled with three distinct batches of sorbent make up this method validation kit. The XBridge BEH C18 sorbent is a workhorse for HPLC method development since it can be applied over the whole pH range of the mobile phase. The trifunctionally linked C18 ligand gives you the widest usable pH range, better low pH stability, and extremely little column bleed, making it universal lab equipment for the majority of HPLC separations.

When compared to columns with standard packing materials, the XBridge packing exhibits very little retention loss or peak shape deterioration because it uses specialized techniques for bonding and end-capping and is ligand stable at low pH. Additionally, this indicates that the XBridge BEH C18 Method Validation Kit provides a remarkable column lifespan without the use of sterically inhibiting the stationary phase. The XBridge BEH C18 Method Validation Kit, which combines the BEH particle production method with cutting-edge bonding and end-capping technologies to create a highly sought-after piece of lab equipment, is also extremely durable at high pH settings.

Protect your columns using the XBridge BEH C18 VanGuard Cartridge, 130Å, 5 µm, 3.9 mm X 5 mm, 3/pk. Made using the exact packing materials, the cartridge complements the columns by filtering out unwanted pollutants.