Torus DEA Prep Guard Cartridge, 130Å, 5 µm, 30 mm X 10 mm, 1/pk

To produce quick, reliable achiral separations, Torus Columns are specially made to take full advantage of the ACQUITY UPC2 System's capabilities. Torus Columns' four brand-new, cutting-edge chemistries for convergence chromatography streamline the technique development procedure. These columns have excellent peak shapes that minimize or eliminate the requirement for additives while increasing selectivity for a variety of chemicals and strengthening robustness. Our website allows you to browse the full selection of Torus goods and to shop for lab equipment directly from us.

The Waters Torus DEA Prep Guard Cartridges are designed to be used with the Torus DEA columns for reversed-phase liquid chromatography. The single Torus DEA Prep Guard Cartridges are designed to firmly fit up against a Torus Column's inlet side.

The easy-to-install Torus DEA Prep Guard Cartridge protects your Torus DEA Column against damaging contaminants. The lab equipment improves the analytical performance of the column by eliminating any chemical and particle impurities that might be present in the mobile phase stream.

The most exacting cGMP, ISO 9001 regulations are followed in the production of Prep Guard Cartridges for Torus DEA Columns. Each unit is reviewed before being used to ensure that it will perform at its highest potential and increase the selectivity, sensitivity, and speed of your analysis. The Torus DEA Prep Guard Cartridges are made of the same high-quality materials as the Torus columns and are intended for analytical performance.

Thanks to the Waters Torus DEA Prep Guard Cartridges, your UPLC analytical columns will last longer without degrading their chromatographic analytical performance. By getting rid of chemical and particle contaminants from the columns, the effectiveness of the UPLC, UHPLC, and HPLC separation is preserved.

We recommend that you also explore the 30 mm X 10 mm Prep Guard Holder. You can rely on the Waters Prep Guard Holder to safeguard your prep column and prevent any loss of peak shape or plate count during analysis. There are two basic methods that the high-performance Prep Guard Holders carry out this duty. The frits are first used as a filter to catch unwelcome particles. Second, chemicals that permanently adsorb to the packing material are removed when the guard cartridge is packed with the same material as the prep column.