Oasis MCX 3 cc Flangeless Vac Cartridge, 60 mg Sorbent per Cartridge, 30 µm, 100/pk
The Oasis MCX, found in the 3 cc flangeless Oasis MCX cartridges, is a novel mixed-mode polymeric sorbent that has been optimized to achieve better selectivity and sensitivity for extracting basic compounds with cation-exchange groups. Because the Oasis MCX sorbent is water wettable, it retains its ability for higher retention and excellent recoveries even when the sorbent runs dry, removing the need for additional measures to keep the sorbent beds from drying out during the critical steps prior to sample loading. Because the cartridges have no flanges, they can be densely packed for use in specialized automated SPE apparatus.
SPE methods will be used to separate analytes from complex samples into two primary fractions: acidic compounds and basic or neutral compounds, taking full advantage of the Oasis MCX 3 cc Vac Cartridge's selectivity and robustness. If your sample contains fractionated extracts, you can analyze them using a variety of methods, including LC/MS.
Successful sample preparation is required for liquid chromatography, which comprises obtaining the sample component of interest in the solution, free of interfering matrix components, and at a concentration sufficient for detection or measurement. Waters created Oasis HLB, a polymeric reversed-phase sorbent with improved recovery, reproducibility, retention, and selectivity, as well as the most advanced preparation and extraction processes. Since then, Oasis has grown to include a broader range of sorbents and laboratory equipment, including the Oasis MCX sorbent found in this 3 cc Vac Cartridge.
You can shop for lab equipment that meets your requirements and discover additional Waters products and collections on our website. There is also equipment compatible with the BioSuite CM Cation-Exchange CXC Column. You can also contact a member of our global support team through our website, who can answer any questions or issues you have and help you choose the right solutions for your chromatographic and laboratory needs.
You might also be interested in XSelect HSS T3 Column, 100Å, 2.5 µm, 2.1 mm X 100 mm, 1/pk; The XSelect HSS T3 is a low-coverage C18 phase that is compatible with 100% aqueous mobile phase and should be your first choice for developing separations for polar and nonpolar substances. The ultra-low MS bleed XSelect HSS T3 columns are completely scalable and transferrable to UPLC separations.
