Waters offers a comprehensive range of analytical system solutions, software, and services for scientists. Liquid Chromatography. Mass Spectrometry. Waters is the leading provider of lab equipment, supplies and software for scientists across the world. Easily research and order everything your lab needs! Waters offers a comprehensive range of analytical system solutions, software, and services for scientists. Liquid Chromatography. Mass Spectrometry. Waters is the leading provider of lab equipment, supplies and software for scientists across the world. Easily research and order everything your lab needs!
This is a concentrated version of the 50mM Ammonium Formate buffer that is recommended to be used with the Biopharm/Glycan system, using the UPLC H-class and the ACQUITY UPLC BEH Glycan Column. This buffer contains 10ml of 5050 mM Ammonium Formate in a Water w/ 3.8% Formic acid matrix. This allows the end user to directly pour the concentrate into a 1L bottle of LCMS grade water for the correct concentration of 50 mM at a pH of 4.4.
Specifications
Separation Mode
HILIC
Detection Method
FLR, MS
Formulation
Liquid
Storage Condition
5C +/- 3C (Fridge)
System Type
LC
Shelf Life
12 Months
Shipping Condition
Ambient
Volume
10 mL
Type
Mobile Phase
UNSPSC
41116107
Application
Glycan
Product Type
Standards
Units per Package
1 pk
Hazaradous MaterialThis product contains hazardous material which requires special freight handling. Additional charges may apply.
With the introduction of the reagent RapiFluor-MS, Waters has become a leader in innovation for biotherapeutic analysis, reimagining the workflow for released N-glycan analysis. With the ionization capability necessary to maximize the information generated by MS detection, the new glycan analysis workflow increases the speed of deglycosylation and streamlines labeling. The Glycoworks system eliminates compromises between speed and sensitivity in sample preparation, while increasing confidence in your analytical results.
Waters knows that characterizing and monitoring the glycan population of a biotherapeutic protein has continued to present technical and logistical challenges across the industry. We continue to drive technological advancements in pursuit of improving released glycan analysis. By combining the same preparation and analytical technologies, the Glycoworks system has provided analysts with smart workflows, rapid and streamlined sample preparation, and unrivaled FLR and MS response. This allows for a reduced time from sample to results, with sample cleanup able to be completed in as little as 30 minutes.
Part of this system, Waters Ammonium Formate Solution – Glycan Analysis is a concentrated version of the 50 mM Ammonium Formate buffer that is recommended for use with the Biopharm/Glycan system. It is also compatible with the UPLC H-class and lab equipment such as the ACQUITY UPLC Glycan BEH Amide Column, 130Å, 1.7 µm, 2.1 mm X 150 mm, 1K - 150K, 1/pk. The buffer contains 10 mL of 5050 mM Ammonium Formate in a water with 3.8% Formic acid matrix. The use of the buffer allows the scientist to directly pour the concentrate into a 1L bottle of LCMS grade waters, resulting in the correct concentration of 50 mM at a pH of 4.4.
How Should Waters’ Ammonium Formate Solution be Stored?
Initial storage is best done at room temperature. When longer than one month of storage is needed post solubilization, room temperature is no longer recommended. When not in use, it should then be stored in the fridge. Adequate time should be given for the solution to return to room temperature before use. When smaller volumes are needed, one could use 1 mL at a time in order to add up to an eventual 100 mL of water.
Recommended storage temperature in the refrigerator is 5C +/-3C.
The recommended shelf life of the solution is 12 months.
