Cartridge Holder, 7.8 x 10 mm
Artikelnummer: 186000708
Unlike conventional preparative guard column designs where a loss in the overall chromatographic performance is expected, the addition of a high-efficiency cartridge into the purification system will not only significantly increase column lifetime, but ma...
|
Cartridge Holder, 7.8 x 10 mm
Artikelnummer: 186000708
|
----
|
|
Chemistry Socks
Artikelnummer: 600001730
Show the world your love of chemistry with these fun periodic table of elements socks. Great for work or a special event this summer!
|
Chemistry Socks
Artikelnummer: 600001730
|
----
|
|
Cartridge Holder, 19 x10 mm
Artikelnummer: 186000709
Unlike conventional preparative guard column designs where a loss in the overall chromatographic performance is expected, the addition of a high-efficiency cartridge into the purification system will not only significantly increase column lifetime, but ma...
|
Cartridge Holder, 19 x10 mm
Artikelnummer: 186000709
|
----
|
|
O-rings for 10 x10 mm cartridge holder, 2 pkg
Artikelnummer: 700001436
Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
|
O-rings for 10 x10 mm cartridge holder, 2 pkg
Artikelnummer: 700001436
|
----
|
|
O-RING PKG 2/PK
Artikelnummer: WAT097954
|
O-RING PKG 2/PK
Artikelnummer: WAT097954
|
----
|
|
Cartridge Column Holder for 2.1 x 20 mm Cartridge Column
Artikelnummer: 186000262
|
Cartridge Column Holder for 2.1 x 20 mm Cartridge Column
Artikelnummer: 186000262
|
----
|
|
PrepPak® 1000 Module
Artikelnummer: WAT089592
Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
|
PrepPak® 1000 Module
Artikelnummer: WAT089592
|
----
|
|
O-rings for 19 x 10mm Cartridge Holder, 2 pkg
Artikelnummer: 700001020
Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
|
O-rings for 19 x 10mm Cartridge Holder, 2 pkg
Artikelnummer: 700001020
|
----
|
|
O-Ring, Filling port, 10/Pkg
Artikelnummer: WAT005129
Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
|
O-Ring, Filling port, 10/Pkg
Artikelnummer: WAT005129
|
----
|
|
Kalrez Washer, 10/pk
Artikelnummer: WAT005147
Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
|
Kalrez Washer, 10/pk
Artikelnummer: WAT005147
|
----
|
|
Holder kit for Cartridge and Guard Columns
Artikelnummer: WAT046910
The Sentry guard column holder is required for use with Sentry guard columns that have an I.D. of 3.0, 3.9, and 4.6 mm and a length of 20 mm. This kit also contains a column joining tube assembly which allows your holder to connect with the analytical col...
|
Holder kit for Cartridge and Guard Columns
Artikelnummer: WAT046910
|
----
|
|
O-Ring Buna-N 2-030, (RF Feed Thru)
Artikelnummer: WAT022453
Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
|
O-Ring Buna-N 2-030, (RF Feed Thru)
Artikelnummer: WAT022453
|
----
|
|
Check Valve, RCM
Artikelnummer: WAT082888
Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
|
Check Valve, RCM
Artikelnummer: WAT082888
|
----
|
|
O-Ring, RCM, 4/pkg
Artikelnummer: WAT015797
This small O-Ring is used for the connectors on the RCM 8 X 10 Cartridge Holder when using normal phase chemistry.
|
O-Ring, RCM, 4/pkg
Artikelnummer: WAT015797
|
----
|
|
2.1x10mm Holder Kit for Cartridges and Guard Columns
Artikelnummer: WAT097958
The Sentry guard column holder is required for use with Sentry guard columns that have a 2.1 mm I.D. and a length of 10 mm. This kit also contains a column joining tube assembly which allows your holder to connect with the analytical column. The Sentry gu...
|
2.1x10mm Holder Kit for Cartridges and Guard Columns
Artikelnummer: WAT097958
|
----
|
|
O-ring, 19mm ID Prep Guard Holder, 2/Pk
Artikelnummer: 186008824
Replacement O-rings for the 19x10mm Prep Guard Holder (Part Number 186008745). These o-rings are considered both SFC and LC mobile phase compatible.
|
O-ring, 19mm ID Prep Guard Holder, 2/Pk
Artikelnummer: 186008824
|
----
|
|
2.1 mm Cartridge End Connector Kit
Artikelnummer: 700000117
|
2.1 mm Cartridge End Connector Kit
Artikelnummer: 700000117
|
----
|
|
ConnectorTube Assy. non-metallic
Artikelnummer: WAT088919
Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
|
ConnectorTube Assy. non-metallic
Artikelnummer: WAT088919
|
----
|
|
Connector Assy, SS
Artikelnummer: WAT082892
Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
|
Connector Assy, SS
Artikelnummer: WAT082892
|
----
|
|
Integrated Guard Holder
Artikelnummer: WAT046905
|
Integrated Guard Holder
Artikelnummer: WAT046905
|
----
|
|
Cartridge Holder PKG 10 x10 mm
Artikelnummer: 289000779
Unlike conventional preparative guard column designs where a loss in the overall chromatographic performance is expected, the addition of a high-efficiency cartridge into the purification system will not only significantly increase column lifetime, but ma...
|
Cartridge Holder PKG 10 x10 mm
Artikelnummer: 289000779
|
----
|
|
O-Ring Kit, 2/pkg
Artikelnummer: 186007012
|
O-Ring Kit, 2/pkg
Artikelnummer: 186007012
|
----
|
|
PTFE Adapter, 1/8 in. to 1/16 in., 5/Pkg
Artikelnummer: WAT005137
Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the...
|
PTFE Adapter, 1/8 in. to 1/16 in., 5/Pkg
Artikelnummer: WAT005137
|
----
|
|
O-rings for 7.8 x 10mm cartridge holder, 2 pkg
Artikelnummer: 700001019
Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
|
O-rings for 7.8 x 10mm cartridge holder, 2 pkg
Artikelnummer: 700001019
|
----
|
|
GUARD-PAK HOLDER
Artikelnummer: WAT088141
|
GUARD-PAK HOLDER
Artikelnummer: WAT088141
|
----
|
|
