Cartridge Holder, 19 mm X 10 mm
When using most conventional preparative Guard Columns, loss in overall chromatographic performance is expected with their use. However, the addition of a high-efficiency cartridge into your system will not only significantly increase the analytical column lifetime, but may also result in enhanced loadability of the system. The Cartridge Holder listed here is designed to support and fit cartridges that are 10mm in length and available in different models with three different diameters (7.8, 10, and 19mm) to support different cartridges as per your preparative chromatographic needs. Replacement o-rings are available for all cartridge holders, thus allowing optimized performance and an extended lifetime for these products.
The Cartridge Holder 19x10 can be incorporated readily into the existing liquid chromatography system and does not require any external utilities. There are also no column end-fittings to connect or reconnect. By adding the Cartridge Holder 19x10 to your lab equipment collection, you will not only increase the efficiency of the lab but also reduce the overall operating costs.
Like all Waters equipment, the Cartridge Holder 19x10 is manufactured in dedicated Waters manufacturing facilities following the highest industry standards, cGMP, and ISO 9001:2000. The facilities also utilize ultra-pure reagents to ensure the highest quality is met. Each batch of the packing material and equipment undergoes stringent testing to ensure only quality material is used for production. The results are held to narrow specification ranges to assure excellent, reproducible performance and gives you peace of mind that you can rely on the equipment you have received from Waters.
If you are interested in reading more about the different products manufactured by Waters, please check our website where you can shop for lab equipment, or reach out to any member of our global team for assistance with other products, getting more information, or sharing any concerns you might have.
You might also be interested in reviewing the Waters Preparative Chromatography Mix Standard; the Quality Control Reference Material portfolio is a unique collection of standards and mixtures that allow the user to evaluate and benchmark their chromatography system before analysis of critical material. The Preparative Chromatography Standard is 5 mg/mL each of Diclofenac sodium salt, Diphenhydramine hydrochloride, and Flavone in DMSO-- this standard mix should be used to confirm the benchmark performance of your preparative or purification system. This particular QC Reference Material is a specially formulated mix that includes a void marker, neutral, acidic, and basic compounds. It can be used with a variety of column chemistries, dimensions, and system hardware.
