•  Deutschland
    • United States / English
    • China / 简体中文
    • Japan / 日本語
    • India / English
    • United Kingdom / English
    • France / Français
    • South Korea / 한국어
    • Canada / Français
    • Canada / English
    • Taiwan / 繁體中文
    • Brazil / Português
    • Italy / Italiano
    • Spain / Español
    • Land ändern

    • Guard Hardware

    Für Preisinformationen: Login
      Produkt Listenpreis
    info

    Cartridge Holder, 7.8 x 10 mm

    Artikelnummer: 186000708
    Unlike conventional preparative guard column designs where a loss in the overall chromatographic performance is expected, the addition of a high-efficiency cartridge into the purification system will not only significantly increase column lifetime, but ma...
    		Cartridge Holder, 7.8 x 10 mm
    Artikelnummer: 186000708     		----
    info

    Chemistry Socks

    Artikelnummer: 600001730
    Show the world your love of chemistry with these fun periodic table of elements socks. Great for work or a special event this summer!
    		Chemistry Socks
    Artikelnummer: 600001730     		----
    info

    Cartridge Holder, 19 x10 mm

    Artikelnummer: 186000709
    Unlike conventional preparative guard column designs where a loss in the overall chromatographic performance is expected, the addition of a high-efficiency cartridge into the purification system will not only significantly increase column lifetime, but ma...
    		Cartridge Holder, 19 x10 mm
    Artikelnummer: 186000709     		----
    info

    O-rings for 10 x10 mm cartridge holder, 2 pkg

    Artikelnummer: 700001436
    Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
    		O-rings for 10 x10 mm cartridge holder, 2 pkg
    Artikelnummer: 700001436     		----
    info

    O-RING PKG 2/PK

    Artikelnummer: WAT097954
         		O-RING PKG 2/PK
    Artikelnummer: WAT097954     		----
    info

    Cartridge Column Holder for 2.1 x 20 mm Cartridge Column

    Artikelnummer: 186000262
         		Cartridge Column Holder for 2.1 x 20 mm Cartridge Column
    Artikelnummer: 186000262     		----
    info

    PrepPak® 1000 Module

    Artikelnummer: WAT089592
    Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
    		PrepPak® 1000 Module
    Artikelnummer: WAT089592     		----
    info

    O-rings for 19 x 10mm Cartridge Holder, 2 pkg

    Artikelnummer: 700001020
    Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
    		O-rings for 19 x 10mm Cartridge Holder, 2 pkg
    Artikelnummer: 700001020     		----
    info

    O-Ring, Filling port, 10/Pkg

    Artikelnummer: WAT005129
    Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
    		O-Ring, Filling port, 10/Pkg
    Artikelnummer: WAT005129     		----
    info

    Kalrez Washer, 10/pk

    Artikelnummer: WAT005147
    Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
    		Kalrez Washer, 10/pk
    Artikelnummer: WAT005147     		----
    info

    Holder kit for Cartridge and Guard Columns

    Artikelnummer: WAT046910
    The Sentry guard column holder is required for use with Sentry guard columns that have an I.D. of 3.0, 3.9, and 4.6 mm and a length of 20 mm. This kit also contains a column joining tube assembly which allows your holder to connect with the analytical col...
    		Holder kit for Cartridge and Guard Columns
    Artikelnummer: WAT046910     		----
    info

    O-Ring Buna-N 2-030, (RF Feed Thru)

    Artikelnummer: WAT022453
    Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
    		O-Ring Buna-N 2-030, (RF Feed Thru)
    Artikelnummer: WAT022453     		----
    info

    Check Valve, RCM

    Artikelnummer: WAT082888
    Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
    		Check Valve, RCM
    Artikelnummer: WAT082888     		----
    info

    O-Ring, RCM, 4/pkg

    Artikelnummer: WAT015797
    This small O-Ring is used for the connectors on the RCM 8 X 10 Cartridge Holder when using normal phase chemistry.
    		O-Ring, RCM, 4/pkg
    Artikelnummer: WAT015797     		----
    info

    2.1x10mm Holder Kit for Cartridges and Guard Columns

    Artikelnummer: WAT097958
    The Sentry guard column holder is required for use with Sentry guard columns that have a 2.1 mm I.D. and a length of 10 mm. This kit also contains a column joining tube assembly which allows your holder to connect with the analytical column. The Sentry gu...
    		2.1x10mm Holder Kit for Cartridges and Guard Columns
    Artikelnummer: WAT097958     		----
    info

    O-ring, 19mm ID Prep Guard Holder, 2/Pk

    Artikelnummer: 186008824
    Replacement O-rings for the 19x10mm Prep Guard Holder (Part Number 186008745). These o-rings are considered both SFC and LC mobile phase compatible.
    		O-ring, 19mm ID Prep Guard Holder, 2/Pk
    Artikelnummer: 186008824     		----
    info

    2.1 mm Cartridge End Connector Kit

    Artikelnummer: 700000117
         		2.1 mm Cartridge End Connector Kit
    Artikelnummer: 700000117     		----
    info

    ConnectorTube Assy. non-metallic

    Artikelnummer: WAT088919
    Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
    		ConnectorTube Assy. non-metallic
    Artikelnummer: WAT088919     		----
    info

    Connector Assy, SS

    Artikelnummer: WAT082892
    Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
    		Connector Assy, SS
    Artikelnummer: WAT082892     		----
    info

    Integrated Guard Holder

    Artikelnummer: WAT046905
         		Integrated Guard Holder
    Artikelnummer: WAT046905     		----
    info

    Cartridge Holder PKG 10 x10 mm

    Artikelnummer: 289000779
    Unlike conventional preparative guard column designs where a loss in the overall chromatographic performance is expected, the addition of a high-efficiency cartridge into the purification system will not only significantly increase column lifetime, but ma...
    		Cartridge Holder PKG 10 x10 mm
    Artikelnummer: 289000779     		----
    info

    O-Ring Kit, 2/pkg

    Artikelnummer: 186007012
         		O-Ring Kit, 2/pkg
    Artikelnummer: 186007012     		----
    info

    PTFE Adapter, 1/8 in. to 1/16 in., 5/Pkg

    Artikelnummer: WAT005137
    Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the...
    		PTFE Adapter, 1/8 in. to 1/16 in., 5/Pkg
    Artikelnummer: WAT005137     		----
    info

    O-rings for 7.8 x 10mm cartridge holder, 2 pkg

    Artikelnummer: 700001019
    Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.
    		O-rings for 7.8 x 10mm cartridge holder, 2 pkg
    Artikelnummer: 700001019     		----
    info

    GUARD-PAK HOLDER

    Artikelnummer: WAT088141
         		GUARD-PAK HOLDER
    Artikelnummer: WAT088141     		----
    `

    Waters Kontakt

    Lokale Niederlassungen

    Waters Online ToolBox

    Product Selection made easy
    View Now

    Academic Preferred Pricing on Consumables Working in Academia?

    Then you'll receive Waters Preferred Pricing... a 20% discount on your consumable products order! From LC columns to sample prep, vials, filters, standards & reagents, and workflow analytical kits like GlycoWorks & ProteinWorks. Discount will be applied to cart at checkout.
    Find products now!

    Zurück zum Seitenanfang Zurück zum Seitenanfang
    © 2024 Waters. Alle Rechte vorbehalten.
    Nutzungsbedingungen Datenschutz Cookies Cookie Preferences Marken Sitemap Karriere