대한민국

United States / English
China / 简体中文
Japan / 日本語
India / English
United Kingdom / English
Germany / Deutsch
France / Français
Canada / Français
Canada / English
Taiwan / 繁體中文
Brazil / Português
Italy / Italiano
Spain / Español
국가변경

Waters offers a comprehensive range of analytical system solutions, software, and services for scientists. Liquid Chromatography. Mass Spectrometry. Waters is the leading provider of lab equipment, supplies and software for scientists across the world. Easily research and order everything your lab needs! Waters offers a comprehensive range of analytical system solutions, software, and services for scientists. Liquid Chromatography. Mass Spectrometry. Waters is the leading provider of lab equipment, supplies and software for scientists across the world. Easily research and order everything your lab needs!

Analytical Standards and Reagents

Sample Preparation Products

Vials, Plates, and Certified Containers

Gas Chromatography Packings

Guard Hardware

가격을 확인하려면 로그인을 하십시오 . 아직 가입하지 않으셨다면, 귀하의 계정을 등록하시기 바랍니다.

	검색결과	가격
Cartridge Holder, 7.8 x 10 mm 파트넘버: 186000708 Unlike conventional preparative guard column designs where a loss in the overall chromatographic performance is expected, the addition of a high-efficiency cartridge into the purification system will not only significantly increase column lifetime, but ma...	Cartridge Holder, 7.8 x 10 mm 파트넘버: 186000708	----
Chemistry Socks 파트넘버: 600001730 Show the world your love of chemistry with these fun periodic table of elements socks. Great for work or a special event this summer!	Chemistry Socks 파트넘버: 600001730	----
Cartridge Holder, 19 x10 mm 파트넘버: 186000709 Unlike conventional preparative guard column designs where a loss in the overall chromatographic performance is expected, the addition of a high-efficiency cartridge into the purification system will not only significantly increase column lifetime, but ma...	Cartridge Holder, 19 x10 mm 파트넘버: 186000709	----
O-rings for 10 x10 mm cartridge holder, 2 pkg 파트넘버: 700001436 Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.	O-rings for 10 x10 mm cartridge holder, 2 pkg 파트넘버: 700001436	----
O-RING PKG 2/PK 파트넘버: WAT097954	O-RING PKG 2/PK 파트넘버: WAT097954	----
Cartridge Column Holder for 2.1 x 20 mm Cartridge Column 파트넘버: 186000262	Cartridge Column Holder for 2.1 x 20 mm Cartridge Column 파트넘버: 186000262	----
PrepPak® 1000 Module 파트넘버: WAT089592 Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.	PrepPak® 1000 Module 파트넘버: WAT089592	----
O-rings for 19 x 10mm Cartridge Holder, 2 pkg 파트넘버: 700001020 Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.	O-rings for 19 x 10mm Cartridge Holder, 2 pkg 파트넘버: 700001020	----
O-Ring, Filling port, 10/Pkg 파트넘버: WAT005129 Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.	O-Ring, Filling port, 10/Pkg 파트넘버: WAT005129	----
Kalrez Washer, 10/pk 파트넘버: WAT005147 Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.	Kalrez Washer, 10/pk 파트넘버: WAT005147	----
Holder kit for Cartridge and Guard Columns 파트넘버: WAT046910 The Sentry guard column holder is required for use with Sentry guard columns that have an I.D. of 3.0, 3.9, and 4.6 mm and a length of 20 mm. This kit also contains a column joining tube assembly which allows your holder to connect with the analytical col...	Holder kit for Cartridge and Guard Columns 파트넘버: WAT046910	----
O-Ring Buna-N 2-030, (RF Feed Thru) 파트넘버: WAT022453 Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.	O-Ring Buna-N 2-030, (RF Feed Thru) 파트넘버: WAT022453	----
Check Valve, RCM 파트넘버: WAT082888 Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.	Check Valve, RCM 파트넘버: WAT082888	----
O-Ring, RCM, 4/pkg 파트넘버: WAT015797 This small O-Ring is used for the connectors on the RCM 8 X 10 Cartridge Holder when using normal phase chemistry.	O-Ring, RCM, 4/pkg 파트넘버: WAT015797	----
2.1x10mm Holder Kit for Cartridges and Guard Columns 파트넘버: WAT097958 The Sentry guard column holder is required for use with Sentry guard columns that have a 2.1 mm I.D. and a length of 10 mm. This kit also contains a column joining tube assembly which allows your holder to connect with the analytical column. The Sentry gu...	2.1x10mm Holder Kit for Cartridges and Guard Columns 파트넘버: WAT097958	----
O-ring, 19mm ID Prep Guard Holder, 2/Pk 파트넘버: 186008824 Replacement O-rings for the 19x10mm Prep Guard Holder (Part Number 186008745). These o-rings are considered both SFC and LC mobile phase compatible.	O-ring, 19mm ID Prep Guard Holder, 2/Pk 파트넘버: 186008824	----
2.1 mm Cartridge End Connector Kit 파트넘버: 700000117	2.1 mm Cartridge End Connector Kit 파트넘버: 700000117	----
ConnectorTube Assy. non-metallic 파트넘버: WAT088919 Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.	ConnectorTube Assy. non-metallic 파트넘버: WAT088919	----
Connector Assy, SS 파트넘버: WAT082892 Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.	Connector Assy, SS 파트넘버: WAT082892	----
Integrated Guard Holder 파트넘버: WAT046905	Integrated Guard Holder 파트넘버: WAT046905	----
Cartridge Holder PKG 10 x10 mm 파트넘버: 289000779 Unlike conventional preparative guard column designs where a loss in the overall chromatographic performance is expected, the addition of a high-efficiency cartridge into the purification system will not only significantly increase column lifetime, but ma...	Cartridge Holder PKG 10 x10 mm 파트넘버: 289000779	----
O-Ring Kit, 2/pkg 파트넘버: 186007012	O-Ring Kit, 2/pkg 파트넘버: 186007012	----
PTFE Adapter, 1/8 in. to 1/16 in., 5/Pkg 파트넘버: WAT005137 Waters® tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the...	PTFE Adapter, 1/8 in. to 1/16 in., 5/Pkg 파트넘버: WAT005137	----
O-rings for 7.8 x 10mm cartridge holder, 2 pkg 파트넘버: 700001019 Replacement Tubing Assembly, MP35N .062 x .004 x 19.0. This Tubing Assembly is provided with Low Pressure Fittings and is found on H-Class Bio CM-A Systems.	O-rings for 7.8 x 10mm cartridge holder, 2 pkg 파트넘버: 700001019	----
GUARD-PAK HOLDER 파트넘버: WAT088141	GUARD-PAK HOLDER 파트넘버: WAT088141	----